To understand EQ and its intricacies you need hands-on experience, but to help you get started, here's a table of general uses and the different ranges that EQ can affect. As every sound is different these are very general guidelines but we hope you find this set of EQ tips useful.

EQ Tips Table - EQ Ranges For A Better Mix

Kick Drum

Any apparent muddiness can be rolled off around 300Hz. Try a small boost around 5-7kHz to add some high end. 50-100Hz ~ Adds bottom to the sound 100-250Hz ~ Adds roundness 250-800Hz ~ Muddiness Area 5-8kHz ~ Adds high end presence 8-12kHz ~ Adds Hiss

Snare

Try a small boost around 60-120Hz if the sound is a little too wimpy. Try boosting around 6kHz for that 'snappy' sound. 100-250Hz ~ Fills out the sound 6-8kHz ~ Adds presence

Hi hats or cymbals

Any apparent muddiness can be rolled off around 300Hz. To add some brightness try a small boost around 3kHz. 250-800Hz ~ Muddiness area 1-6kHz ~ Adds presence 6-8kHz ~ Adds clarity 8-12kHz ~ Adds brightness

Bass

Try boosting around 60Hz to add more body. Any apparent muddiness can be rolled off around 300Hz.If more presence is needed, boost around 6kHz. 50-100Hz ~ Adds bottom end 100-250Hz ~ Adds roundness 250-800Hz ~ Muddiness Area 800-1kHz ~ Adds beef to small speakers 1-6kHz ~ Adds presence 6-8kHz ~ Adds high-end presence 8-12kHz ~ Adds hiss

Vocals

This is a difficult one, as it depends on the mic used to record the vocal. However...Apply either cut or boost around 300hz, depending on the mic and song.Apply a very small boost around 6kHz to add some clarity. 100-250Hz ~ Adds 'up-frontness' 250-800Hz ~ Muddiness area 1-6kHz ~ Adds presence 6-8kHz ~ Adds sibilance and clarity 8-12kHz ~ Adds brightness

Piano

Any apparent muddiness can be rolled off around 300Hz. Apply a very small boost around 6kHz to add some clarity. 50-100Hz ~ Adds bottom 100-250Hz ~ Adds roundness 250-1kHz ~ Muddiness area 1-6kHz ~ Adds presence 6-8Khz ~ Adds clarity 8-12kHz ~ Adds hiss

Electric guitars

Again this depends on the mix and the recording. Apply either cut or boost around 300hz, depending on the song and sound. Try boosting around 3kHz to add some edge to the sound, or cut to add some transparency. Try boosting around 6kHz to add presence. Try boosting around 10kHz to add brightness. 100-250Hz ~ Adds body 250-800Hz ~ Muddiness area 1-6Khz ~ Cuts through the mix 6-8kHz ~ Adds clarity 8=12kHz ~ Adds hiss

Acoustic guitar

Any apparent muddiness can be rolled off between 100-300Hz. Apply small amounts of cut around 1-3kHz to push the image higher. Apply small amounts of boost around 5kHz to add some presence. 100-250Hz ~ Adds body 6-8kHz ~ Adds clarity 8-12kHz ~ Adds brightness

Strings

These depend entirely on the mix and the sound used. 50-100Hz ~ Adds bottom end 100-250Hz ~ Adds body 250-800Hz ~ Muddiness area 1-6hHz ~ Sounds crunchy 6-8kHz ~ Adds clarity 8-12kHz ~ Adds brightness